In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other mask for dog areas of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it is really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be certain it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain the ears are level and be sure that it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll have to do some sanding to make certain it’s secure on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.